JuiceBox® Pro 40 WiFi-enabled EV Charging Station - 40 Amps
This product cannot be shipped to P.O. Boxes
JuiceBox Pro 40 is a compact, high power, fully ruggedized and portable Level 2 (240V) electric vehicle charging station with advanced Wi-Fi control and smart grid features.
JuiceBox automatically adjusts to provide just as much power as your EV is able to accept, up to 40 amps.
- Wi-Fi enabled
- 40 amps (10kW)
- 25-ft cable
At 40 amps (10kW), the JuiceBox Pro 40 charges up to 10x faster
Weather resistant 25-ft cable. The unit is rugged, weatherproof and durable.
Works with any EV.
Cannot be shipped to PO boxes.
WiFi-enabled Smartphone Control
Control time of charge, max. charge rate, and monitor power, amperage and more.
Monitor, manage, and control your charger via voice commands on Amazon Echo and Google Home.
JuiceBox can be plugged into a "dryer" electrical outlet, RV-type or regular wall outlet with available adapters. Please note that not all 120V adapters on the market will properly work with the JuiceBox. Compatible adapters are available on the manufacturer's site.
Wi-Fi is NOT required to use the EV charging station. However, you will need a Wi-Fi connection to use smart charging features, including:
- Access JuiceNet app via Smartphone or web from anywhere.
- Set charging schedules so that your EV avoids consuming electricity at peak times. Most utilities offer time of use (TOU) rate schedules to their customers who are EV drivers.
- Track energy usage, allowing you to view your charging history and extract accurate energy data.
- See real-time data
- Start & Stop charging remotely
- View cost savings per charging session
Your charging station will act as a standard charging unit in absence of Wi-Fi. If you set it up on wifi but then disconnect it, any schedules or limits you set when connected to the station may remain even if the station is not connected to Wi-Fi. Wi-Fi memory will be erased upon unplugging from power and will be reinstated once connected to Wi-Fi again.
If you have more than one EV, you can set up your two (or more) units to share one electrical circuit. Say, you have only 40A capacity in your panel but have two vehicles charging simultaneously. You can program your units to never exceed 40A combined draw. If only one car is charging, it gets the full 40A of current. When the second car shows up, the current gets shared 20A / 20A between the two. When one of the cars finishes charging, the remaining car ramps back to 40A.
Charge Time Table
What's included with your JuiceBox Pro 40
A JuiceBox Pro 40, featuring:
A 40-amp 25-ft charging cable (also known as a J1772 cable) A 15" inch NEMA 14-50 input cable (from box to middle of plug) OR 3 FT pigtail (outdoor rated 6 AWG cable with flex conduit) Full JuiceNet charging controls and monitoring Quickstart guide
Standard Convenience Accessories:
An aluminum quick-release mounting bracket A black J1772 plug & cable holder
- Mounting template
|Output Power||40A, 10kW|
|Input Voltage||240 VAC nominal, single phase|
|Input||A 15" inch NEMA 14-50 input cable (from box to middle of plug) OR 3 FT pigtail (outdoor rated 6 AWG cable with flex conduit)|
|Output Cable||25 FT standard length, 20 FT extension cables available
SAE J1772 standard plug
|Dimensions||10 x 6 x 3.5 inches (H, W, D - main enclosure)|
|Shipping Dimensions||18x 16 x 8 inches (H, W, D - dual walled box)|
|Weight||~20lbs fully equipped (with cables)|
|Codes and Standards||NEMA 4 / IP66, SAE, FCC Part 15 Class B, NEC 625 compliant|
|Warranty||3 year manufacturer's warranty for residential usage|
|Safety||UL and cUL Listed|
JuiceBox Pro 75
JuiceBox Pro 75 is a compact, high power and fully ruggedized electric vehicle charging station (EVSE). It is the only charging station on the market that enables you to max out the charging rate of a Tesla Model S or Model X with dual onboard chargers.View the JuiceBox Pro 75